PROTEC B2S(R) 12.5/xxx 12.5kA (10/350)

protec b2s 12,5 xxx
Category IEC/EN/VDE Class I-II / Type 1-2 / B-C
Location of use: Main distribution boards
Network systems: TN-S / TN-C / IT
Protection modes: L/N-PE ; L-PEN
Protective elements: High energy MOV
Surge discharge rating: Iimp=12.5kA
MOV max. withstand capability 1×8/20: 100kA
Housing: Modular design
Complies with: IEC/EN 61643-11

Specifikacija proizvoda

Tehnical data
Type 275 385 440
Elecrtical characteristics
Max.continuous operating voltage (AC/DC) Uc 275/350V 385/500V 440/580V
Nominal discharge current (8/20) In 25kA
Max.discharg current (8/20) Imax 60kA
Impulse current (10/350) Iimp 12.5kA
Specific energy W/R 39kJ/Ω
Charge Q 6.25As
Protection level Up <1.4kV <1.7kV <2.0Kv
Residual voltage at Iimp Ures <1.0kV <1.4kV <1.5kV
Residual voltage at 5kA (8/20) Ures <0.9kV <1.3kV <1.4kV
Follow current Ifi NO
Response time tA <25ns
Thermal protection YES
Back-up fuse (if mains > 160A) 160AgL
Short-circuit withstand current ISCCR 25kA/50Hz
Mechanical characteristics
Terminal screw torque max.3.0Nm
Temperature range -40˚C…+ 80˚C
Terminal cross section 35mm² (solid) / 25mm² (stranded)
Mounting 35mm DIN rail – EN60715
Degree of protection IP 20
Housing material thremoplastic; extinguishing degree UL 94 V-0
Indication if disconnector operation red flag
Remote contacts (RC) YES
Contact ratings AC:250V/0.5A;125V/3A
Terminal cross section max. 1.5mm²
Remote terminal torque 0.25Nm
Ordering information
Uc 275 385 440
Ordering code PROTEC B2S 12.5/xxx 506018 506020 506021
Ordering code PROTEC B2SR 12.5/xxx (with remote contacts) 506023 506025 506026